Write a Review
$34.99
$39.95
12% Off
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation.
The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
$35.00
This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back.
Keep your chill
Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way.
The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability.
Product details:
- Made with safer chemicals, designed to preserve resources and diminish disposables
- Double-Wall Vacuum Insulation - Temperature defying chill
- Lightweight Design - So lightweight you might forget it's there
- Hours Cold - 18 hours
- No Squeeze Required - Just grab, lift, and sip
- 18/8 Stainless Steel - Tough as nails, but doesn't taste like them
- High-Flow Cap - Logic-defying sipping ease
- Leakproof Lockout - No spills, all thrills
Features:
Easy Drinking
Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip!
Tired of plastic?
Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time.
Stainless steel vs. titanium
Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.
$40.00
This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back.
Keep your chill
When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down.
The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability.
Product details:
- Made with safer chemicals, designed to preserve resources and diminish disposables
- Double-Wall Vacuum Insulation - Temperature defying chill
- Lightweight Design - So lightweight you might forget it's there
- Hours Cold - 18 hours
- No Squeeze Required - Just grab, lift, and sip
- 18/8 Stainless Steel - Tough as nails, but doesn't taste like them
- High-Flow Cap - Logic-defying sipping ease
- Leakproof Lockout - No spills, all thrills
Features:
Easy Drinking
Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip!
Tired of plastic?
Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time.
Stainless steel vs. titanium
Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.
$9.50
$9.95
5% Off
- Size: 14 x 1.5 – 2.25
- ISO Width: 44 – 55mm
- ISO Diameter: 254 / 14"
- Wall Thickness: 0.9
- Shaft Type: Smooth
- Valve: Standard Schrader
- Valve Core: Removable
- Tube Compound: Butyl
$39.95
- 120db electronic rechargeable bicycle horn with remote
- USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses
- Charging indicator light shows red when charging, and green when fully charged
- IP65 water and dust proof
- Compatible with 22.2 - 31.8mm handlebars
- Whistle, horn, and alarm sounds
$39.95
Here's a big basket to carry large loads. Sunlite's Rack Top Mesh Basket attaches to your rear rack (sold separately) and sports sturdy steel construction.
$799.99
If you've got bicycling on your mind but crave the added stability and comfort of a three wheeler, then the Miami Sun is just what you're looking for. This new Traditional 24" 7-Speed model takes all of the great features of the original Traditional 24" trike and adds easy twist-shift gearing to smooth out the hills. We’ve also added a powerful rear disc brake to complement the front linear-pull brake for solid on-demand stopping power. With its comfortable ride quality, low step-over frame and great equipment, the Traditional trike line has been a best-seller for years and now it’s even more well equipped. Take the Traditional 24" 7-Speed for a spin today and see for yourself how bright the Miami Sun is.
- High-tensile steel Low-Step frame
- Sunrace 7-speed drivetrain (13-15-18-21-24-28-34T)
- Sunrace twist shifter
- Alloy linear-pull front brake with parking lock
- Mechanical disc rear brake with parking lock
- Alloy rims with stainless steel spokes
- 24 x 1.75" tires
- 9" high-rise steel handlebar and stem, foam grips
- Sun Tractor saddle with heavy-duty steel base
- Steel chain guard and nickel-plated front fender
- Vinyl-coated steel wire basket
$599.99
If you've got cycling on your mind but crave the added stability and comfort of three wheels, then the Traditional Trike is what you're looking for. Our trike is specifically designed with an ultra-low step through frame, like our Streamway, for easy on and off access. Once seated, you immediately notice the impressive comfort of the tractor style saddle. If bigger is better, then Sun hit pay dirt.
- High-tensile steel easy step-through frame with compatibility for optional direct mount rear derailleur and disc brake
- Single-speed gearing (Internal 3-speed, Internal 5-speed and 7-speed derailleur kits available for purchase separately)
- Alloy linear-pull front brake with brake lever actuated parking lock (Rear axle disc brake caliper kit available for purchase separately)
- Single wall alloy rims with stainless steel spokes
- 24 x 1.75" CST street friendly tires
- Sun Trike High Rise steel handlebar
- Sun Tractor padded saddle with heavy duty steel base
- Steel chain guard
- Nickel plated steel front fender
- Vinyl coated steel wire basket, 21 x 15 x 9"
$249.99
A fast and efficient shoe with tested strength and grip for the most demanding rides. Intuitive adjustments and a clean design make the Sidi Fast 2 an easy-to-use high-performance shoe.
-The Single Tecno-3 system creates a perfect tension balance between the shoe's internal and external side, guarantees an excellent closure adapting to every instep
-The newly designed integrated heel cup is lightweight and reinforced to avoid deformations after prolonged strenuous use
-The Aerolite sole is designed to maximize aerodynamics and power transmission
-The nylon and carbon fiber construction of the Aerolite Sole provides the ideal balance of stiffness for efficient power transfer, and flexibility for comfort
-The Fast 2 includes a user replaceable polyurethane heel pad for improved stability and traction off the bike
$20.00
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints
- Shimano model # CJ-S700
- Does not include cable fixing bolt unit
- OEM cassette joint unit for Alfine SG-S700
$4.00
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
$11.99
- Special single gear design with chain tensioner
- Revised tooth profile to prevent chain skip
- MODEL NO: CS-S500
- SERIES: SHIMANO ALFINE S7000/S700 Series
- Gear thickness (mm): 2.0
- Recommended chain: Super Narrow HG for 9-speed
$29.99
- 7/8 speed design
- Steel inner and outer links with steel chain cage
- Multi-clamp to fit 28.6 – 34.9mm frames
- Multi-pull design
- Total gear teeth: 48
- For seattube angles between 63 - 66 degrees
$29.99
Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use.
- Compact conventional swing design
- Low-friction wide linkage reduces shifting effort and increases rigidity
- Dual-pull design allows it to be used with top or bottom cable routing
- Multi clamp band is compatible with all frame dimensions
- 66-69 degree chainstay to seat tube angle range
- For outer chainring size from 42 to 48 tooth, total capacity 20 teeth
- Compatible with 7- or 8-speed drivetrains
$39.95
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
$24.95
Shimano CN-HG71 6/7/8-Speed Chains
- 8-speed MTB chain meets durability requirements for e-bike use
- Designed for precise Hyperdrive SIS and Dual SIS Index shifting
- Includes chain and chain connection pin, or quick link
- Links: 116
$51.99
- 10-speed cassette sprocket
- Offers a wide range of gearing options.
- Lightweight sprocket carrier, it delivers smooth gear steps and precise shifting.
- Ride anywhere with smooth and precise HG shifting
$104.99 - $117.99
• Steel construction on all but the largest aluminum gear
• Nickel-plated finish for corrosion and wear resistance
• Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance
• Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs
• The largest cog (40t) is positioned inboard and above the drive-side flange
• Hubs with tall drive-side flanges may not be compatible due to spoke interference
$84.00
$89.99
7% Off
Reliable, perfect shifting awaits with Shimano's Deore XT Dyna – Sys Cassette. It features chrome – plated steel sprockets mounted to two aluminum carriers for an ideal blend of durability and low weight. Closer gear ratios in the middle of the cassette ensure you'll have the perfect gear for the trail's ups and downs. Plus, the cogs are ramped and machined for flawless, lightning – fast shifts.
$59.95
A light touring pedal designed for easy, reliable use for long rides and exploration.
- Double-sided light-action SPD for frequent engagement and disengagement
- Clean appearance to match road bikes
- Weight: 450g
- Cleats included: SM-SH56 (also accepts SM-SH51)
$80.00
PD-EH500 pedals
FEATURE
- One side SPD, the other side flat
- Light action binding makes frequent stepping-in & out easier
- Better grip on flat side for wet condition
BENEFIT
- Convenient road touring pedal
- Optimized for urban riding
- Multi-condition
- Best match with CT or MT shoes
$190.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$149.95
PD-R7000 NEW
FEATURE
- Carbon fiber reinforced resin pedal body
- Wide contact area
- 265g/pr (25g/pr lighter than PD-5800)
BENEFIT
- Optimum power transfer
- Lightweight
- Aerodynamic image
- Color: CFRP
- Average weight: 265 g
- Road clearance: 31°
- Binding: Single Sided
- Cleat included: SM-SH11
- Optional cleat: SM-SH10 / SM-SH12
- Pedal Type: Road
- Reflector: SM-PD65
$79.95
The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range.
- Advanced shifting performance provides the confidence to enjoy any trail
- Fast and shockless shifting
- Hyperglide+
- Extra wide range 12-speed drivetrain
-10-51T (12-speed)
- Silent drivetrain in all gear positions
- Decreased rear derailleur and chain tension in low gear
- New bumper added to rear derailleur pulley cage
- Bump Stopper
- Bigger 13T pulley
- Stable drivetrain on rough terrain
- Low-profile design
- Shimano Shadow RD+
$19.99
The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x7 and 3x8 speed drivetrains.
- Action: Top Swing
- Applicable Top-Mid tooth difference: 10T
- Cable Route Type: Dual-Pull
- Chain line: 47.5/50mm
- Chainstay angle: 63-66°
- Top gear teeth: 42T/48T
- Total capacity: 20T
$48.99
The Shimano Deore XT CN-M8100 12-speed chain is optimized for use with the Deore XT M8100 MTB drivetrain system.
- HYPERGLIDE+ technology dedicated chain delivers greater chain retention, improved shifting efficiency, and smoother transmission over rough terrain
- Extended inner plate improves chain engagement
- Reduced shift times and pedaling shock
- Includes Non-reusable Shimano Quick-Link (SM-CN910-12)
- Links (links): 126
- Color: Silver
- Drivetrain Speeds: 12
- Weight: 252 g
$39.95
The chain is the heart of the Eagle 1x12 drivetrain, ensuring quiet operation, long life and precise shifting. It features the same link geometry as XX1 Eagle, with solid pins and a more modest finish treatment.
- Not for use with front derailleur drivetrains
- Links (links): 126
- Drivetrain Speeds: 12
- Chain Connection Type: Single Use Master Link
- Half Link Chain: No
- Weight: 260
- Compatibility: All levels of Eagle drivetrain systems
$999.99
$1,099.99
9% Off
When the original PK Ripper burst onto the scene in 1979, it took the BMX world by storm & set a new benchmark for radness. Here we are now 40+ years later and it’s happening again with the new PK Ripper 27.5, designed by the man himself, the PK of “PK Ripper”, Perry Kramer. This ultra-cool bike features tubeless ready 27.5 x 2.5" Vee Speedster tires, sealed internal headset, internal cable routing, SRAM Level hydraulic disk brakes, Oakley B-1B grips, and, of course, Perry’s stamp of approval. This is the PK of the future!
- Perry Kramer replica 6061 aluminum PK Ripper frame w/ floval tubing, seatstays wrap, internal cable routing, and looptail rear end
- Full Cr-Mo Landing Gear forks with disc tabs
- SE Racing forged alloy 2-piece cranks with 24mm hollow alloy spindle, external sealed bearing bottom bracket and alloy chainring
- SRAM Level hydraulic disc brakes with 2-piston caliper and SRAM Direct Link levers
- Tubeless compatible Alex DP30 rims with Vee Speedster 27.5 x 2.5" tires, tubeless valves, and tubeless rim tape included.
- Oakley B-1B Grips with Perry Kramer Donuts
- Perry Kramer Flyer Seat with SE bottle opener
- SE Racing snap padset
- Custom Perry Kramer PK Ripper sticker sheet
- 31.2 pounds
$899.99
This bike is Savage! Literally. The all-new 27.5” Savage Flyer is a ferocious mix of everything you can ask for in a bike. It’s built with a sturdy 6061 aluminum frame & equipped with a mid-bottom bracket, internal headset, 10-speeds, and disc brakes. And the 27.5” x 2.3” Kenda Kiniption tires feature a complete wraparound diamond tread pattern for ultimate grip on those swerves. When you’re ready to go full bonkers, hop on the Savage Flyer.
Key Features
- 6061 Aluminum Floval tubing frame, internal headset, mid-bottom bracket, fixed dropouts, removable derailleur hanger
- Cr-Mo Landing Gear forks
- Kenda Kiniption 27.5” x 2.3” tires with bead-to-bead diamond tread for ultimate grip
- MicroShift XLE RD-M61S 1x10 short-cage derailleur
- Sealed-bearing rear alloy hub with double-wall rims and MicroShift 11-32T 10-speed cassette
- FSA internal headset
- Raise It Up! seat with grippy savage textured top cover
- Tektro MD-280 mechanical disc brakes
- 34 pounds
Page 1 of 4
Next page